Phone IP address
(for IPv4 only) — Enter the IP address
•
of your device.
DNS addresses
— Enter the IP addresses of the primary
•
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your
internet service provider.
Proxy server address
•
server.
Proxy port number
•
proxy server.
WLAN internet access points
Select
Menu
Ctrl. panel
>
Destinations
Access
>
on the display. Or, open one of the access point groups,
select an access point marked with
Options
> Edit.
Use the instructions provided by your service provider to
edit the following:
WLAN network name
•
Search for
networks. If you select an existing network,
WLAN network mode
determined by the settings of its access point device.
Network status
— Define whether the network name
•
is displayed.
WLAN network mode
•
ad hoc network, and to allow devices to send and
receive data directly; a WLAN access point device is not
needed. In an ad hoc network, all devices must use the
same WLAN network name.
WLAN security mode
•
WEP, 802.1x, orWPA/WPA2. (802.1x and WPA/WPA2
are not available for ad hoc networks.) If you select
— Enter the address of the proxy
— Enter the port number of the
Settings
and
Connection
>
point, and follow the instructions
, and select
— Select
Enter manually
and
WLAN security mode
— Select
Ad-hoc
to create an
— Select the encryption used:
Open
network, no encryption is used. The WEP, 802.1x,
and WPA functions can be used only if the network
supports them.
Use access point
•
the device to ask for confirmation before the
connection using this access point is created or
Automatically
destination using this access point automatically.
To enter the settings for the selected security mode, select
WLAN security
settings.
Advanced WLAN settings
Select
Options
>
>
following:
IPv4 settings
•
the subnet IP address, the default gateway, and the IP
addresses of the primary and secondary DNS servers.
Contact your internet service provider for these
addresses.
IPv6 settings
•
or
Ad-hoc channel
•
a channel number (1-11) manually, select
are
defined.
Proxy server address
•
proxy server.
Proxy port number
•
Packet data (GPRS) settings
Select
Menu
Ctrl. panel
>
Packet
data.
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your device
— Select
After confirmation
to set the device to connect to the
Advanced settings
and from the
— Enter the IP address of your device,
— Define the type of DNS address.
(only for ad hoc networks) — To enter
— Enter the address for the
— Enter the proxy port number.
Settings
and
>
to set
User
Connection
>
119