Application Manager - Nokia E72 User Manual

providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started by
the server when the device settings need to be updated.
To create a new server profile, select
profiles Options
>
You may receive these settings from your service provider
in a configuration message. If not, define the following:
Server name
•
server.
Server ID — Enter the unique ID to identify the
•
configuration server.
Server password
•
device to the server.
Access point
•
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you
have selected Internet
Host address
•
configuration server.
Port — Enter the port number of the server.
•
User name and
•
password for the configuration server.
Allow configuration
•
to initiate a configuration session.
Auto-accept all requests
•
want the server to ask for your confirmation when it
initiates a configuration session.
106
Options
New server profile.
>
— Enter a name for the configuration
— Enter a password to identify your
— Select the access point to use for the
as the bearer type.
— Enter the web address of the
Password — Enter your user ID and
— Select Yes to allow the server
— Select Yes
Network authentication
•
http authentication.
Network user name
•
your user ID and password for the http authentication.
This setting is available only if you have selected
Network authentication
To connect to the server and receive configuration settings
for your device, select
Server
>
To view the configuration log of the selected profile, select
Options
To update the device software over the air, select
Options
your settings. When you receive the update package on
your device, follow the instructions on the display. Your
device is restarted once the installation is complete.
Downloading software updates may involve the
transmission of large amounts of data (network service).
Make sure that the device battery has enough power, or
connect the charger before starting the update.
Warning: If you install a software update, you cannot
use the device, even to make emergency calls, until the
installation is completed and the device is restarted.

Application manager

if you do not
With Application manager, you can see the software
packages installed in your device. You can view details of
installed applications, remove applications, and define
installation settings.
— Select whether to use
and Network password
to be used.
Options
>
View log.
>
Check for updates. The update does not erase
>
— Enter
Start configuration.