Fein Turbo I Instruction Manual page 9

OBJ_BUCH-0000000150-003.book Page 9 Friday, February 28, 2014 11:08 AM
Symbols.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Before commencing this working step, pull the power plug out of
thesocket. Otherwise there will be danger of injury if the power tool
should start unintentionally.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
Use eye protection during operation.
Use ear protection during operation.
This symbol confirms the certification of this product for the USA and
Canada.
General prohibition sign. This action is prohibited.
This sign warns of a directly imminent, dangerous situation. A false reac-
DANGER
tion can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause severe
WARNING
or fatal injury.
This sign warns of a possible dangerous situation that could cause injury.
CAUTION
Worn out power tools and other electrotechnical and electrical prod-
ucts should be sorted separately for environmentally-friendly recycling.
Product with basic insulation and exposed, conductive parts additionally
connected to the ground conductor.
~ or a. c. Alternating current
1 ~ Alternating current, single-phase
Character Unit of measurement,
national
n
rpm; /min; min
0
P
W
°
U
V
f
Hz
I A
m lbs
l
ft, in
Ø ft, in
m, s, kg, A, mm, V, W,
Hz, N, °C, dB, min, m/s
Explanation
-1
; r/min Rated speed
Electrical power
Angle width
Electric voltage
Frequency
Electric current intensity
Mass
Length, width, height, depth, diameter or thread
Diameter of a round part
Basic and derived units of measurement from the
2
international system of units SI.
en
9