Connecting To Your Service - Palm m500 Series Handbook

2. Enter the code to disable Call Waiting on the Disable call waiting
line.
Note:
Each telephone company assigns a code to disable Call
Waiting. Contact your local telephone company for the
code that is appropriate for you.
3. Tap OK.
Using a calling card
The Use calling card field enables you to use your calling card when
dialing your ISP or intranet server. Keep in mind that there is
usually a delay before you enter your calling card number. When
you define your calling card number, you need to add commas at
the beginning to compensate for this delay. Each comma delays
transmission of your calling card number for two seconds.
To use a calling card:
1. Tap the Use calling card check box to select it.
Select this
box to use a
calling card
2. Enter your calling card number on the Use calling card line.
Note:
It's a good idea to add at least three commas before your
calling card number to compensate for the cue delay.
3. Tap OK.

Connecting to your service

After you set your Connection and Network Preferences, establishing
a connection to your Internet Service Provider (ISP) or your
company's network (dial-in server) is easy.
Note: If you are connecting to an ISP, you need a third-party
application, such as a web browser or news reader, to take
advantage of this connection. For information about third-
Page 202 Setting Preferences for Your Handheld
Enter your
calling card
number here