Troubleshooting; Fault Checklist - Panasonic NA-140VG4 Operating Instructions & Installation Instructions

Problem
Buttons do not work.
Door does not open.
Unusual odour
No water going into
the appliance.
There is only a small
amount of water.
Water builds up
during the wash
process.
Water drains out
during the wash
process.
- The programme, temperature and process settings cannot
be changed while washing is in progress (the rinse and
spin settings can be changed) .
- Child safety lock may be activated . (See page 21 .)
- Door lock may be activated . (See page 9 .)
- Child safety lock may be activated . (See page 21 .)
- The water temperature or level may be too high .
- Rubber parts may give off a smell when you start using
the appliance, but the smell will go away over time .
You can wash the drum by running the 90 °C programme .
(See page 22 .)
- The water tap may be turned off .
- The water supply hose may be frozen . (See page 24 .)
- The water supply may be disrupted .
- The water supply filter may be clogged . (See page 24 .)
- If you have paused the washing and then restart it, the
appliance may drain out some water .
Do NOT pour water in through the door .
- This is normal; water is automatically supplied if the
amount of water has decreased . For heavy loads, the
water may fill up repeatedly .
- This is normal; the water frequently drains out and builds
up in order to wash away excess foam . This feature is
called foam detection .

Fault Checklist

Cause

Troubleshooting - 25