Panasonic NA-140VG4 Operating Instructions & Installation Instructions page 28

Fault Checklist
Problem
The electricity supply
cuts out while the
appliance is on.
A circuit breaker trips
and the electricity
supply is cut.
The water supply is
disrupted.
The display is not
clear.
28 - Troubleshooting
- The appliance stops and will not start by itself when the
power comes back on . You have to select a programme
and start it again .
- The appliance stops and will not start by itself when you
reset the breaker . You have to find out what caused the
breaker to trip and solve it . Then, reset the breaker to turn
the electricity supply back on and switch on the appliance
again .
- When the water is supplied again, it may be impure at first .
You have to disconnect the water supply hose and drain
away the impure water through the tap . Make sure that the
water supply hose has been reconnected before using the
appliance .
- The appliance may be in a brightly lit or sunlit area .
Cause