Mounting The Transceiver Unit; Mounting The Display Unit - Furuno CSH-7 Installation Manual

Color scanning sonar

Hide thumbs Also See for CSH-7:

Table of Contents

1.3 Mounting the Transceiver Unit

• The transceiver unit generates heat so the mounting location should be well ventilated and

dry.

• The unit is only designed for wall mounting. The unit weighs 14 kg so reinforce the mount-

ing location if necessary.

• Secure the maintenance space shown in the figure below for ease of maintenance and ser-

vice.

Note: The transceiver unit can be mounted on the hull unit with Transceiver Frame Kit (op-

tion). See page 5-1 for details.

Select the mounting location considering the following condi-

tions:

• Select a location where the display unit can be easily oper-

ated while observing the fishing ground or area surrounding

the vessel.

• Locate the unit at least 1 meter away from a magnetic

compass and equipment which contains magnets (radar

magnetron, loudspeaker, high power transformer).

• Select a location not exposed to direct sunlight, water splash or hot air.

• Select a location which accommodates the viewing angle shown below.

Fixing hole

Figure 1-17 Transceiver unit mounting dimensions

∅

340

210±1

1-11

CRT

45°

Cap

Figure 1-18 Display unit

viewing angle

Table of Contents