Setting Up The Monitor; Unfolding The Monitor Pedestal Base - HP Compaq LA2206xc User Manual

Hide thumbs Also See for Compaq LA2206xc:

Table of Contents

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other

attached devices, then follow the instructions below.

Lift the monitor from its box and place it face down on a flat surface.

Hold down the monitor base with one hand (1) then grasp the top of the stand with the other

hand and unfold the display head 90 degrees (2).

CAUTION:

uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its

normal condition.

Figure 3-1

NOTE:

When the monitor is unfolded for the first time, the display head is locked from adjusting to a

full-height position. To adjust the display head to full height, press down on the display head to unlock

it then pull up on the display head to raise it to the full-height position. Refer to step 3 in

Monitor on page

ENWW

Do not touch the surface of the LCD panel. Pressure on the panel may cause non-

Unfolding the Monitor Pedestal Base

Adjusting the

Table of Contents

Show Quick Links

Table of Contents