HP Compaq LA2206xc User Manual page 32

Table 4-2 OSD Menu (continued)
Icon
24 Chapter 4 Operating the Monitor
Main Menu Submenu
Factory Reset
Source Control
DisplayPort
DVI
VGA
Default Source
Auto-Switch Source
Source Detection
Exit
Description
Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Selects the video input signal. DP (DisplayPort) is
the factory default.
Selects DisplayPort as the video input signal.
Selects DVI as the video input signal.
Selects VGA as the video input signal.
Selects the default or primary video input signal
when the monitor is connected to two active and
valid video sources. The monitor will automatically
determine the video format. The choices are:
●
DisplayPort
●
DVI
●
VGA
The factory default is DisplayPort.
Turns the system's automatic video signal input to
On or Off. The factory default is On.
This option is displayed in the OSD when a
DisplayPort input is selected. You can set Source
Detection to:
●
Always Active
●
Low Power
The factory default is Low Power.
Exits the OSD menu screen.
ENWW