Samsung SR8F3 Series User Manual page 17

Assembling the cleaner
NAME OF EACH PART
Charging Lamp
Charge Pin
Distance Detection Sensor
Installing the batteries
■
Batteries are not supplied with the product. You have to purchase the batteries separately.
Install the alkaline batteries (type D) before use.
1
Lift the cover of the
VIRTUAL GUARD while
pressing the locking tab.
[ Charger (Station) ]
[ VIRTUAL GUARD (OPTION) ]
Mode Lamp
2
Install the batteries into
the VIRTUAL GUARD
as shown by the fi gure
below. (If the batteries are
installed with the incorrect
polarity, the VIRTUAL
GUARD will not work.)
Power Lamp
Power Button
Main Body Detection
Sensor
3
After inserting the tip of
the cover into the slot,
push the other end to
close it until it clicks into
place.
✽ Specifi cation: Alkaline Type D (LR20) batteries
Assembling the cleaner _17
Vents
Catching Sill