Table of Contents
Advertisement
Quick Links
Robotic Vacuum Cleaner
This manual is made with 100 % recycled paper.
✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.
User Manual
imagine
the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
SR8F3* SERIES
SR8F4* SERIES
English
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Samsung SR8F3 Series
Summary of Contents for Samsung SR8F3 Series
- Page 1 This manual is made with 100 % recycled paper. English ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register...
- Page 2 Safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described WARNING in this manual.
- Page 3 Safety information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR ROBOTIC VACUUM CLEANER. Unplug from outlet when not in use and before conducting maintenance. WARNING: to reduce the risk of fi re, electric shock, or injury: GENERAL •...
- Page 4 Safety information • Do not use extension cords or outlets with inadequate current carrying capacity. • Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. • Do not mutilate or incinerate batteries as they will explode at high temperatures.
-
Page 5: Table Of Contents
Contents Power related SAFETY INFORMATION Before use In use Cleaning and maintenance PRODUCT FEATURES Product Features Components ASSEMBLING THE CLEANER Name of each part Installing robotic vacuum cleaner OPERATING THE CLEANER 20 Installation order 20 Turning the power switch on or off 21 Installing the charger 22 Charging 23 About the battery... -
Page 6: Safety Information
Safety information POWER RELATED Do not bend the power cord forcefully or place a heavy object on it that could break it. WARNING - This may result in fi re or electric shock. Make sure to remove any dust or water from the power plug. -
Page 7: Before Use
Safety information BEFORE USE Before activating the robotic vacuum cleaner, make sure that the Dust bin is assembled. CAUTION - If the Dust bin is not inserted, robotic vacuum cleaner will not operate. Never use robotic vacuum cleaner in locations with combustible material such as: CAUTION - Locations with candles or desk lamps on the fl... - Page 8 Safety information BEFORE USE Remove small objects or brittle items from the area to be cleaned in advance. CAUTION - Make sure to clear any objects before cleaning. - Make sure to remove fragile items such as china, glass objects, fl...
- Page 9 Safety information BEFORE USE Install the charger in a location that can be easily accessed by the robotic vacuum cleaner. CAUTION - If the charger is installed in a corner, this may cause extra movements and may disturb the automatic recharging process. Objects in front of the charger will prevent the robotic vacuum cleaner from auto-charging itself.
-
Page 10: In Use
Safety information IN USE You cannot use the robotic vacuum cleaner on thick carpets. - This may result in problems with the robotic vacuum cleaner. CAUTION - This may result in damage to carpets. Do not use the robotic vacuum cleaner on a table or other high locations. -
Page 11: Cleaning And Maintenance
Safety information IN USE Robotic vacuum cleaner cannot completely clean locations that it cannot reach, such as corners, and NOTE spaces between sofas and walls. - Please clean these locations occasionally. Dust clusters may remain after cleaning, when the robotic vacuum cleaner fails to pick up dust clusters that were formed while cleaning. - Page 12 - Failing to do so may result in fi re or electric shock. Before cleaning the charger, make sure to disconnect the power cord for safety. WARNING Contact the Samsung Electronics customer care center to replace the battery. WARNING - Failing to use original batteries will result in product failure.
-
Page 13: Product Features
Product Features CONVENIENT VIRTUAL GUARD FUNCTION You can confi ne the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode. • What is ceiling shape recognition (Visionary mapping This function recognizes the shape of the ceiling using the camera on top to identify the area to be cleaned and determines the best way to pass over and clean every section of the fl... -
Page 14: Product Features
Product Features AUTO CHARGING When the battery is low, the robotic vacuum cleaner is automatically guided to the charger to enable it to perform a quick auto charge. EDGE-CLEANING SIDE ROTATING BRUSH The edge-cleaning side rotating brush cleans dust from the edges. -
Page 15: Assembling The Cleaner
Assembling the cleaner COMPONENTS Main Body ■ Remote Control ■ Charger ■ Others Components ■ OPTION User Manual / 2 Batteries VIRTUAL GUARD Cleaning Brush Air Freshener OPTION Spare Filter Assembling the cleaner _15... -
Page 16: Name Of Each Part
Assembling the cleaner NAME OF EACH PART [ Main unit ] Air freshener compartment cover Display Panel Operating Button VIRTUAL GUARD Remote Control Sensor Sensor Obstacle Sensor Obstacle Sensor Bumper Sensor Front Dust bin Eject Button Dust bin Remote Control Air freshener Sensor compartment... - Page 17 Assembling the cleaner NAME OF EACH PART [ Charger (Station) ] Power Lamp Charging Lamp Charge Pin Vents Catching Sill [ VIRTUAL GUARD (OPTION) ] Power Button Mode Lamp Main Body Detection Sensor Distance Detection Sensor Installing the batteries ■ Batteries are not supplied with the product.
-
Page 18: Remote Control
Assembling the cleaner NAME OF EACH PART [ Remote Control ] Power Recharging Auto Spot Directional Start/Stop Buttons Manual Delay Start Edge Installing the Remote Control Batteries ■ Batteries are not installed in the remote control when purchasing the product. Install the alkaline batteries (type AAA) before use. - Page 19 Assembling the cleaner NAME OF EACH PART [ Display panel ] Ⓐ Ⓑ Ⓒ Ⓓ DISPLAY PART 1. Number Display - Shows the timer display, progress status, and error codes using numbers, letters and graphics. 2. Battery Level Indicator - Charging: Shows the charging progress in 3 steps. - In Use: Shows the battery charge level.
-
Page 20: Operating The Cleaner
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALLATION ORDER 1. Turning the Power Switch on or off To use the robotic vacuum cleaner, you must turn on the Power Switch at the bottom of the main unit. 2. Installing the Charger To charge the robotic vacuum cleaner, you must fi... -
Page 21: Installing The Charger
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALLING THE CHARGER Power Lamp Power Lamp Charging Lamp Charging Lamp 1. Install the charger on a fl at surface. 2. There should be no obstacles 0.5 m to the left and right and within 1 m of the front. -
Page 22: Charging
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER CHARGING When the product is initially purchased, the battery Power Lamp Power Lamp is fully discharged, and you must charge the robotic Charging Lamp Charging Lamp vacuum cleaner manually. Turn on the Power Switch at the bottom of the product. 1. -
Page 23: About The Battery
( ) and model number before purchasing it. - This battery is only for Samsung robotic vacuums. It is strictly prohibited to use it for other appliances or for other purposes. - Do not disassemble or modify the battery. -
Page 24: Installing The Virtual Guard
Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALLING THE VIRTUAL GUARD (OPTION) You can confi ne the robotic vacuum cleaner to Power Button a particular section by using Fence (virtual wall) Mode Lamp Main Unit mode. Detection Sensor Distance Detection Sensor Button operations 1. -
Page 25: Installing The Air Freshener
2. Open the air freshener compartment cover at the top of the Dust bin and put the air freshener in the compartment. 3. Close the air freshener compartment cover. ✽ To purchase the air freshener additionally, please contact the Samsung Electronics service center. Operating the cleaner _25... -
Page 26: Using Robotic Vacuum Cleaner
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER STARTING/STOPPING CLEANING You can run or stop all robotic vacuum functions. Each robotic vacuum function only runs when the Power ■ Switch is turned on. When the robotic vacuum is operating, press the ( ) button ■... -
Page 27: Recharging
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER RECHARGING You can have the robotic vacuum cleaner return to the charger to charge the battery by using the Recharging button. When the robotic vacuum cleaner is operating, press ■ the ( ) button to cancel the operation and press the Recharging button. -
Page 28: Auto Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER AUTO CLEANING The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once. If cleaning begins when the robotic vacuum cleaner is docked with ■ the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving. -
Page 29: Spot Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER SPOT CLEANING You can conveniently clean a specifi c area that has a lot About 1.5m of cookie crumbs, dust, and etc. Move the robotic vacuum cleaner to the location where you ■... -
Page 30: Max Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER MAX CLEANING The robotic vacuum cleaner automatically moves and cleans until the battery runs out and the battery level fl ashes only one level. If cleaning begins when the robotic vacuum cleaner is ■... -
Page 31: Manual Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER MANUAL CLEANING You can move the robotic vacuum cleaner to clean a particular location directly by using the remote control. Move the robotic vacuum cleaner to the location where you ■ want to perform manual cleaning. You can manually clean using the remote control only. -
Page 32: Edge Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER EDGE CLEANING When the Obstacle Sensor detects an obstacle during the cleaning, the Robotic vacuum Cleaner reduces its speed to minimize the bumping impact and the Bumper Sensor also helps it lower the bumping impact. It cleans the corners by reaching to them as close as possible. -
Page 33: Scheduled Cleaning
Operating the cleaner USING THE ROBOTIC VACUUM CLEANER SCHEDULED CLEANING You can schedule robotic vacuum cleaner to start cleaning from a particular time. (Time delay: Up to 23 hours) Scheduled cleaning is only performed when robotic ■ vacuum cleaner is docked with the charger station. (Example) To clean 5 hours Main unit button Remote control button Configuration Sequence... -
Page 34: Maintain Tools And Filter
Maintain tools and fi lter CLEANING THE ROBOTIC VACUUM CLEANER PLEASE KEEP THE CLEANING AND MAINTENANCE METHODS IN MIND When the Power Switch is damaged, please contact the ■ service agent so that it does not cause any accidents. Do not use any means or mechanical devices not ■... -
Page 35: Cleaning The Dust Bin And The Filter
Maintain tools and fi lter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING THE DUST BIN AND THE FILTER First, empty the Dust bin before cleaning it. When separating the Dust bin, take care not to spill the ■ dust out of the Dust bin. Empty the Dust bin in the following cases. -
Page 36: Cleaning The Power Brush
Maintain tools and fi lter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING THE POWER BRUSH You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. • Because the dust in the Dust bin may come out, separate the Dust bin fi... - Page 37 Maintain tools and fi lter CLEANING THE ROBOTIC VACUUM CLEANER 6. After inserting the 3 tips at the top of the cover, push the other end in until it “clicks” into place. • To prevent the robotic vacuum cleaner from becoming clogged, be careful not to vacuum tooth picks or cotton swabs.
-
Page 38: Cleaning The Edge-Cleaning Side Rotating Brush
Maintain tools and fi lter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING THE EDGE-CLEANING SIDE ROTATING BRUSH You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic vacuum. 1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush. -
Page 39: Cleaning The Driving Wheel
Maintain tools and fi lter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING THE DRIVING WHEEL You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic. If the robotic vacuum cleaner suddenly starts to zigzag, there ■... -
Page 40: Troubleshooting
Troubleshooting CHECKLIST BEFORE SVC CALLS SYMPTOM CHECKLIST MEASURE TO TAKE • Is the Dust bin assembled? • Install the Dust bin. Robotic vacuum • Is the Power Switch turned on? • Turn on the Power Switch. cleaner does not Is cleaning mode ( ) in the •... - Page 41 Troubleshooting CHECKLIST BEFORE SVC CALLS SYMPTOM CHECKLIST MEASURE TO TAKE Robotic vacuum • Check whether the power cleaner cannot plug of the charger is plugged correctly into the outlet. fi nd the charger. • If there are any obstacles within a range of about 1m in front of the charger and about 0.5m range to the left and right of the...
-
Page 42: Troubleshooting For Error Codes
Troubleshooting TROUBLESHOOTING FOR ERROR CODES ERROR CAUSE SOLUTION CODE • • Robotic vacuum cleaner is Turn off the Power Switch at the bottom caught, stuck or trapped while and move the robotic vacuum cleaner to a navigating. different location. • •... - Page 43 Product specifi cation 93 mm (Height) 355 mm (Length) 355 mm (Width) Main Body 122 mm (Height) 275 mm (Width) 161 mm (Length) Charger Product specifi cation _43...
-
Page 44: Product Specification
Product specifi cation CLASSIFICATION ITEM DETAIL Diameter 355 mm Mechanical Height 93 mm Specifi cations Weight 3.5 kg Power voltage AC 220-240 V~, 50-60 Hz Charge power consumption 50 W Electrical Specifi cations Main unit power consumption 40 W Battery specifi cations 14.4 V / 2,000 mA Dust bin capacity About 0.6 ℓ... - Page 45 You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to: oss.request@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution may be charged.
- Page 46 distribute such modifi cations or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modifi ed fi les to carry prominent notices stating that you changed the fi les and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
- Page 47 original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9.
- Page 48 (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library.
- Page 49 GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modifi ed version of the Library. The precise terms and conditions for copying, distribution and modifi...
- Page 50 If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfi es the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.
- Page 51 further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
- Page 52 You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker.
- Page 53 Memo...
- Page 54 Memo...
- Page 55 Memo...
- Page 56 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site 0330 SAMSUNG (7267864) www.samsung.com SOUTH AFRICA 0860 7267864 (SAMSUNG) www.samsung.com AUSTRALIA 1300 362 603 www.samsung.com www.samsung.com/hk...