Foxconn M7PMX series User's Manual page 41

► SATA Pri-Master RAID / SATA Pri-Slave RAID / SATA Sec-Master RAID / SATA Sec-Slave
RAID
These items are valid only when "SATA Operation Mode" is set to RAID. They are used to
enable or disable the RAID function of each SATA port on the motherboard.
The relationships between RAID settings and SATA ports on the motherboard are :
SATA Pri-Master RAID is the SATA port 1 of the motherboard.
SATA Pri-Slave RAID is the SATA port 2.
SATA Sec-Master RAID is the SATA port 3.
SATA Sec-Slave RAID is the SATA port 4.
OnBoard Devices
OnBoard Audio Controller
OnBoard HDMI Audio
OnBoard LAN Controller
OnBoard LAN Boot ROM
↑↓→←:Move Enter:Select
► OnBoard Audio Controller
This item is used to select the operation of your audio controller. You can select [Auto] for high
defintion audio. Select [Disabled] will turn off audio function.
► OnBoard HDMI Audio
This item is used to select the audio operation of your High Definition Multimedia Interface.
You can select [Auto] for audio function or select [Disabled] to turn it off.
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.
Phoenix - AwardBIOS CMOS Setup Utility
OnBoard Devices
[Auto] Auto
[Auto]
[Auto]
[Disabled]
+/-/PU/PD:Value F10:Save
F5:Previous Values
34
Item Help
Menu Level ►
ESC:Exit F1:General Help
F7:Optimized Defaults