Foxconn M7PMX series User's Manual page 101

9. Use [↓] key to select "NVIDIA nForce Storage Controller (required)", then press
[Enter].
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select
10. Two drivers are displayed. Press <Enter> to continue.
Windows Setup
Setup will load support for the following mass storage device(s):
NVIDIA RAID Driver (required)
NVIDIA nForce Storage Controller (required)
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device
NVIDIA RAID Driver (required)
NVIDIA nForce Storage Controller (required)
NVIDIA nForce Storage Controller (required)
F3=Exit
ENTER=Continue
94
F3=Exit