Battery Replacement - Honeywell RTH7000 Series Manual

Battery replacement

Grasp thermostat and pull to
remove from wallplate
Batteries are optional (to provide backup power) if
your thermostat was wired to run on AC power when
installed.
Install fresh batteries immediately when the LO BATT
warning begins flashing. The warning flashes about 30
days before batteries are depleted.
Even if the warning does not appear, you should replace
batteries once a year, or before leaving home for more
than a month.
Insert 2 fresh AA alkaline batteries
17
RTH7400/RTH7500
69-1899EF—02