To Unlock The Doors - Chrysler 2010 Sebring Convertible Owner's Manual

Hide thumbs Also See for 2010 Sebring Convertible:
Table of Contents

Advertisement

RKE Transmitter with Integrated Key

To Unlock the Doors

Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver's door or twice to
unlock both doors. The turn signal lights will flash to
acknowledge the unlock signal. The Illuminated Entry
system (if equipped) will also turn on.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21
Remote Key Unlock, Driver Door/All Doors First
Press
This feature lets you program the system to unlock either
the driver's door or both doors on the first press of the
UNLOCK button on the RKE transmitter. To change the
current setting, proceed as follows:
• For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to "Electronic Vehicle
Information
Center
(Customer-Programmable Features)" in "Understand-
ing Your Instrument Panel" for further information.
• For vehicles not equipped with the EVIC, perform the
following procedure:
1. Press and hold the LOCK button on a programmed
RKE transmitter for at least four seconds, but not longer
than 10 seconds. Then, press and hold the UNLOCK
button while still holding the LOCK button.
(EVIC)/Personal
Settings
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents