Displaying The Route On The Map . 140 Displaying The Route List; Detour Function - Mercedes-Benz COMAND MY07 Operator's Manual

Displaying the route list
In the Info menu ( page 139), press
Route
the soft key.
The route appears on the map.
List
Press the soft key.
The list of road/route sections remain-
ing appears.
The road currently travelled on appears
at the top.
Press % or & to scroll through the
list.
Page
The soft keys allow scrolling
through the list page by page.
i
Depending on the distance to the des-
tination, it may take a few moments be-
fore the route list is completed.
The list is completed only when the
route calculation is completed.
displayed before the last list entry.

Detour function

The Detour function blocks a route seg-
ment ahead.
The length of this route segment can be
entered. The system then calculates a de-
tour route if possible.
Show the soft key displays
( page 139).
During route guidance
.
i
Detour
The soft key display indicates
whether the Detour function is active.
= not active.
= active.
Detour function is not active:
You can activate the function and set
the length of a route segment to be
Dest.
is
blocked;
or
Detour function is already active:
You can change the length of the route
segment to be blocked ( page 142),
or switch OFF the Detour function by
deleting the detour ( page 142).
Navigation*
141