Displaying The Route On The Map - Mercedes-Benz COMAND MY07 Operator's Manual

Navigation*
During route guidance
1 Estimated time of arrival
2 Remaining driving time in hours and
minutes
3 Remaining journey (distance)
1, 2 and 3 refer to the stop-over desti-
nation. You'll only see the details for the fi-
nal destination when you arrive at your
stopover and the system has calculated
the route to the main destination.
140
i
The estimated time of arrival does not
refer to the time zone of destination,
but always refers to the time zone of
the vehicle's current location. For a
correct calculation, make sure that the
system clock is set correctly
( page 166).
Selectable soft keys
Route
soft key:
Provides access to the display of the
route on the map,
Mode
soft key:
Provides access to the setting of the
route mode ( page 113).

Displaying the route on the map

In the Info menu, press the
key.
The map appears. The route remaining
is highlighted in blue.
The destination is marked with a flag
, any stop-over destination is marked
with a flag
tion is identified with the
Depending on the distance to the des-
tination, it may take some time before
the route display appears.
Route
soft
s
. The current vehicle posi-
symbol.