Advertisement
Bulletin No: 09-033/06
© 2006 Mazda Motor of America, Inc.
12. Carefully lay lid and guides down to line up remaining tabs.
13. Using a flat-tipped screwdriver, slide guide forward to engage tabs to sides of cup holder assembly.
14. Slide center console lid to fully closed position.
PLACE FLAT TIPPED SCREWDRIVER
INTO SLOT AND SLIDE GUIDE TOWARD
FRONT OF CUP HOLDER TO ENGAGE
TABS (REPEAT FOR BOTH SIDES)
1653g
GUIDE TAB SHOWN DISENGAGED
1653h
GUIDE TAB SHOWN ENGAGED
Last Issued: 7/21/2006
Page 4 of 5
Advertisement
