Mazda 2007 CX-9 Owner's Manual page 58

CX-9_8V83-EA-06I_Edition3 Page58
Monday, February 26 2007 7:17 PM
Essential Safety Equipment
Child Restraint
qLATCH Child-Restraint System
Installation Procedure (Second-
Row Outboard Seats)
1. Slide the second-row seat as far back as
possible.
2. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
3. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
For rear
right seat
NOTE
The markings above the LATCH lower anchors
indicate the locations of LATCH lower
anchors for the attachment of a child-restraint
system.
4. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
5. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety. Please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
2-46
Form No.8V83-EA-06I
Anchor bracket location
Tether strap position
For rear
left seat
Black plate (58,1)
Tether strap
Forward