Mazda 2007 CX-9 Owner's Manual page 410

CX-9_8V83-EA-06I_Edition3 Page410
Monday, February 26 2007 7:21 PM
Maintenance and Care
Owner Maintenance
2. Open the clip and slide the blade
assembly in the direction of the arrow.
3. Wrap a flathead screwdriver or similar
tool with a soft cloth to prevent
damage to the clip.
NOTE
Using a soft cloth-wrapped flathead
screwdriver.
4. Tilt the blade assembly and remove it
from the arm.
CAUTION
To prevent damage to the windshield
let the wiper arm down easily, don't
let it slap down on the windshield.
8-28
Form No.8V83-EA-06I
Black plate (410,1)
5. Pull down the blade rubber and slide it
out of blade holder.
6. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.