Mazda 2006 Mazda3 4-Door Owner's Manual page 283

Mazda3_8U55-EA-05G_Edition1 Page283
Tuesday, May 31 2005 1:20 PM
High-beam bulb
1. Turn the socket and bulb assembly
counterclockwise and remove it.
Carefully remove the headlight bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.
2. Disconnect the bulb from the electrical
connector by pressing the tab on the
connector with your finger and pulling
the bulb upward.
3. Install the new bulb in the reverse order
of removal.
NOTE
To replace the bulb, contact an
l
Authorized Mazda Dealer.
If the halogen bulb is accidentally
l
touched, it should be cleaned with
rubbing alcohol before being used.
Use the protective cover and carton
l
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
Form No.8U55-EA-05G
Black plate (283,1)
Owner Maintenance
Low-beam bulb
(Xenon fusion bulb)
You cannot replace the low beam bulbs by
yourself.
The bulbs must be replaced at an
Authorized Mazda Dealer.
(Halogen bulbs)
1. Detach the electrical connector from
the bulb by pulling it to the rear.
2. Pull off the sealing cover.
3. Unhook the bulb retaining spring.
4. Swing the retaining spring out and
away to free the headlight bulb.
5. Carefully remove the headlight bulb
from the socket by pulling it straight
back.
Maintenance and Care
8-37