RX-8_8T69-EA-04G_Edition1 Page58
Wednesday, June 9 2004 2:11 PM
Knowing Your Mazda
Doors and Locks
qTransmitter Maintenance
CAUTION
Make sure the battery is installed
l
with the correct pole facing upward.
Battery leakage could occur if it is
not installed correctly.
When replacing the battery, be
l
careful not to bend the electrical
terminals or get oil on them. Also be
careful not to get dirt in the
transmitter as it could damage it.
Danger of battery explosion if it is
l
incorrectly replaced.
Replace only with the same type
l
battery (CR1620 or equivalent).
Dispose of used batteries according
l
to the following instructions.
Insulate the plus and minus
l
terminals of the battery using
cellophane or equivalent tape.
Never disassemble.
l
Never throw the battery into fire
l
and/or water.
Never deform or crush.
l
3-6
Form No.8T69-EA-04G
Black plate (58,1)
Replacing the transmitter battery
1. Insert a small screwdriver into the slot
and push the tab to remove the key
from the transmitter.
Tab
2. Insert a small screwdriver into the slot
and gently pry open the transmitter.