Mazda 2005 RX-8 Owner's Manual page 271

RX-8_8T69-EA-04G_Edition1 Page271
Wednesday, June 9 2004 2:13 PM
qReplacing a Bulb (Interior)
Overhead light/Map lights (Front)
1. Remove the screws with a Phillips
screwdriver.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of removal.
Form No.8T69-EA-04G
Black plate (271,1)
Owner Maintenance
Overhead light (Rear), Courtesy lights,
Vanity mirror lights
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
screwdriver.
2. Disconnect the bulb by pulling it out.
Overhead light (Rear)
Edge
Courtesy lights
Edge
Maintenance and Care
8-37