Mazda 2005 RX-8 Owner's Manual page 164

Mazda 2005 rx-8 automobile owner's manual
Hide thumbs Also See for 2005 RX-8:
Table of Contents

Advertisement

RX-8_8T69-EA-04G_Edition1 Page164
Wednesday, June 9 2004 2:12 PM
Interior Comfort
Climate Control System
CAUTION
When using the air conditioner while
driving up long hills or in heavy traffic,
closely monitor the temperature gauge
(page 5-33).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner off.
NOTE
When maximum cooling is desired,
l
set the temperature control dial to the
extreme cold position and set the air
intake selector to the
then set the fan control dial to
position 4.
If warmer air is desired at floor level,
l
set the mode selector switch at the
position and adjust the
temperature control dial to maintain
maximum comfort.
The air to the floor is warmer than
l
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
qVentilation
1. Press the mode selector switch to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
6-8
Form No.8T69-EA-04G
qWindshield Defrosting and
Defogging
1. Press the windshield defroster switch.
2. Set the temperature control dial to the
desired position.
3. Set the fan control dial to the desired
speed.
Foggy Windshield:
Using the
temperature control set to the cold
position will cause the outside of the
position,
windshield to fog up. Your vision will
be hampered, which could lead to a
serious accident. Set the temperature
control to the hot or warm position
when using the
NOTE
For maximum defrosting, set the
l
temperature control dial to the
extreme hot position and the fan
control dial to position 4.
If warm air is desired at the floor, set
l
the mode selector switch to the
position.
In the
l
conditioning is automatically turned
on to defrost the windshield quickly
(however, the indicator light does not
illuminate) and the
automatically selected. The air intake
selector switch cannot be changed to
the
Black plate (164,1)
WARNING
position with the
position.
or
position, air
position is
position.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-8

Table of Contents