Mazda 2005 RX-8 Owner's Manual page 199

RX-8_8T69-EA-04G_Edition1 Page199
Wednesday, June 9 2004 2:12 PM
qClock
When the ignition switch is in the ACC or
ON position, the time is displayed.
Time setting
1. Press the CLK button until a beep
sounds, and 12Hr and 24Hr will be
displayed.
2. Press the SET button to switch between
12Hr and 24Hr displays. The
selected display will flash.
To select the desired clock setting,
press the CLK button again while the
preferred setting is flashing.
3. Hr. ADJUST will be displayed next,
and the hour portion of the display will
flash. Press the SET button to set the
hour, then press the CLK button.
4. Min. ADJUST will be displayed
next, and the minutes portion of the
display will flash. Press the SET button
to set the minutes, then press the CLK
button.
Time resetting
While the clock is displayed, press the
SET button 1.5 seconds or more. When
the button is released, a beep will sound
and the clock will be reset as follows:
(Example)
Form No.8T69-EA-04G
Black plate (199,1)
Interior Equipment
12:01 12:29→12:00
12:30 12:59→1:00
NOTE
When the SET button is released, the
seconds are reset to 00 .
qAmbient Temperature Display
When the ignition switch is in the ON
position, press the AMB button to display
the ambient temperature.
NOTE
The displayed ambient temperature
l
may vary from the actual ambient
temperature depending on the
surrounding area and vehicle
conditions.
Press the AMB button 2 seconds or
l
more to switch the display from
Fahrenheit to Centigrade or vice
versa.
Interior Comfort
6-43