Playing A Dvd; Playback Setup; General Features; Moving To Another Title - Zenith ZDX-313 Installation And Operating Manual

Playing a DVD

Playing a DVD

Playback Setup

1. Turn on the TV and select the video input source
connected to the DVD+VCR.
2. Turn on the audio system (if applicable) and
select the input source connected to the
DVD+VCR.
3. Press OPEN/CLOSE (Z) to open the disc tray
and load your chosen disc in the tray, with the
playback side down.
4. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press N (PLAY).
In some cases, the disc menu might appear
instead.
5. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. "Xx" appears on the screen briefly.
Press N (PLAY) to resume playback (from the
scene point). If you press STOP (x) again or
unload the disc ("x" appears on the screen.), the
unit will clear the stopped point.
Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER (1), the disc tray closes automati-
cally and unit turns off.
If a menu screen is displayed
The menu screen may be displayed first after loading
a DVD which offer a menu.
DVD
Use the b B v V buttons to select the title/chap-
ter you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
Notes:
• If parental control is set and the disc is not within the
rating settings you must input the password.
(See "LOCK" on page 20).
• DVDs may have a region code. Your player will not play
discs that have a region code different from your player.
The region code for this player is 1 (one).
28

General Features

Notes:
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
able on the Setup menu.

Moving to another TITLE

When a disc has more than one title, you can move
to another title. Press DISPLAY and select desired
title by using number (0-9) or b / B then press
ENTER to move to another title.

Moving to another CHAPTER

DVD
When a title on a disc has more than one chapter,
you can move to another chapter as follows:
• Press SKIP (> or .) briefly during playback
to select the next chapter or to return to the
beginning of the current chapter.
• Press SKIP (.) twice in quick successions to
step back to the previous chapter.
• To go directly to any chapter during DVD play-
back, press DISPLAY and press v / V to select
the chapter icon. Input the chapter number (0-9)
or use b / B.
DVD

Slow Motion

1. Press PAUSE/STEP (X) during playback.
The DVD+VCR will now go into PAUSE mode.
2. Use FORWARD (M) to select the required
speed: T 1/7, T 1/6, T 1/4, or T 1/2 (forward).
3. To exit Slow Motion mode, press N (PLAY).
Note:
Slow motion playback in reverse is not possible.
DVD