Operation With Dvd; Playing A Dvd; General Features; Moving To Another Title - Zenith DVB211 Installation And Operating Manual

Operation with DVD

Playing a DVD

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD player.
Audio system: Turn on the audio system
and select the input source connected to the
DVD player.
Press OPEN/CLOSE to open the disc tray.
1 1
Load your chosen disc in the tray, with the label
2 2
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
Press OPEN/CLOSE to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
DVD
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter
you want to view, then press SELECT/ENTER to start
playback.
Press TITLE or MENU to return to the menu screen.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
Parental Control, on page 15).
– DVDs may have a region code.
– Your player will not play discs that have a region code
different from your player. The region code for this
player is 1 (one).
16

General Features

Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

Moving to another TITLE

1/3
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY when playback is stopped, then
press the appropriate numbered button (0-9) to
select a title number.

Moving to another CHAPTER

1/12
When a title on a disc has more than one chapter, you
can move to another chapter as follows:
Press SKIP/SCAN . or > briefly during
playback to select the next chapter or to return to the
beginning of the current chapter.
Press . twice briefly to step back to the previous
chapter.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3 3 /4 4 to select C
(chapter). Then, enter the chapter number using the
numbered buttons (0-9).
Note
For two-digit numbers, press the buttons in rapid
succession.

Slow Motion

DVD
1 Press SLOW t or T during playback.
The player will enter SLOW mode.
2 Use the SLOW t or T to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
DVD
DVD