Dvd Operation; Playing A Dvd; General Features; Moving To Another Title - Zenith DVB312 Installation And Operating Manual

DVD Operation

Playing a DVD

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD player.
Audio system: Turn on the audio system and select
the input source connected to the DVD player.
1 1
Press OPEN/CLOSE to open the disc tray.
2 2
Load your chosen disc in the tray, with the
playback side down.
3 3
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
A menu screen may be displayed first after loading a
DVD with menus.
DVD
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter you
want to view, then press SELECT/ENTER to start play-
back.
Press TITLE or MENU to return to the menu screen.
otes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 15).
– DVDs may have a Region Code.
Your player will not play discs that have a Region
Code different from your player. The region code for
this player is 1 (one).
16

General Features

ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

Moving to another TITLE

1 /3
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY then use the appropriate numbered
button (0-9) to select a title number.

Moving to another CHAPTER

1 /12
DVD
When a title on a disc has more than one chapter, you
can move to another chapter as follows:
Press SKIP/SCAN . or > briefly during
playback to select the next chapter or to return to the
beginning of the current chapter.
Press . twice briefly to step back to the previous
chapter.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, use 3 3 /4 4 to select the chapter
icon. Then, enter the chapter number using the num-
bered buttons (0-9).
ote
Press two-digit numbered buttons (0-9) in rapid
succession. For example, press 0, 2 instead of pressing
only 2.

Search

DVD
1 Press and hold SKIP/SCAN . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or > repeatedly
to select the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
3 To exit SEARCH mode, press PLAY.
DVD