Shelves - GE Side by Side 20 Use And Care & Installation Manual

How to Rearrange Your Shelves
Shelves in the fresh food compartment are adjustable, enabling
you to make efficient shelf arrangements to fit your family's food
storage needs.
To remove shelves:
Tilt the shelf up at front,
then lift it up and out of the
tracks on the rear wall of
the refrigerator.
Shelves in Freezer Compartment
Shelves in the freezer are easily removed and replaced
(on some models).
To remove:
1. While pressing tabs on the shelf
supports on right wall, lift the
shelf out of grooves in the supports.
2. Pull shelf sideways until the
shelf rods come out of holes
on left wall.
Juice Can Rack
(on some models)
Cans of frozen juice are
easily accessible when stored
in the rack on the freezer
compartment door.
To load it, place the first
can in the bottom of the
rack. Then load additional
cans into the rack from
the top.
6
I I
Additional
cans go he=
Place first
can here
To relocate shelves:
Select desired shelf height.
With shelf front raised
slightly, engage the top
hooks in the tracks at the
rear of the cabinet. Then
P
lower the front of the shelf
until it locks into position.
Tempered glass shelves
(on some models) are
adjustable in the same manner.
To replace shelves
Insert the rods into the holes. Then,
while pressing the tabs, lower the
shelf into the grooves in the supports,
Be sure the shelf wire is fully inserted
into grooves.
If shelf supports at desired level on
right wall do not have tabs, merely
lower shelf into place on supports.
Engage -: .,
hook
top
lock into place