How To Use The Drying Cabinet; Starting; Setting Pause And Restart; Stopping - Maytag MDE 1100AES Use And Care Manual

How to use the drying cabinet

Starting

1. Place the articles to be dried in the drying
cabinet and shut the door. See also the
section "Loading".
2. Set an appropriate temperature and drying
time. See the section 'Setting the tempe-
rature selector knob'.

Setting pause and restart

Pause:
Open the door
Restart:
Shut the door.

Loading

In the cabinet there are three sections with
hangers.Every section has a number of rods
on which to hang the items.
The optimised hanging system has extensible
hangers. This system lightens the work for
those who hang up the items and spares both
their back and shoulders.
Hang the articles in the drying cabinet

according to how much room they take
up - not according to their weight.
For optimum efficiency - do not lay artic-

les flat on the upper hanging section.
Long clothes nearest to the walls of the

cabinet and shorter ones towards the
centre. By hanging the items in this way
the most efficient drying results are at-
tained.

Stopping

Open the door and turn the time switch back
to '0'.'
If you have made a pause in the drying
process, when it starts again, the
drying cabinet carries on from the
position it was at when the drying
cycle was interrupted. If you want to
completely stop the set drying cycle,
the time switch is put back to '0'.
Turn up the two lower hanging sections

if long clothes are to be dried.
Hang gloves, caps, scarves and suchlike

on the hanging bars on the inside of the
door.
Draw forward the upper hanging section

hanger hooks in order to hang up the
items more easily. Put it back when it is
not being used.
19