Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Maytag MDE 1100AES
Summary of Contents for Maytag MDE 1100AES
- Page 1 Use and Care Guide Drying cabinet MDE 1100AES...
- Page 2 Good appliances should include all of these. And this is what we try to give you. When you buy an MAYTAG product, we want you to feel assured that the inside is as good as the outside and that the ethics and morals on which we built this machine are just as high as the quality and performance you get from it.
-
Page 3: Table Of Contents
Contents Safety Instructions ....4 Symbols ....4 Important safety information . -
Page 4: Safety Instructions
Safety Instructions Read this manual very carefully and follow the instructions provided. Especially important information is indicated by the accompa- nying symbols and text WARNING ATTENTION. Symbols WARNING Indicates a risk of personal injuries or serious damage to the product if the instructions are not followed. -
Page 5: Description Of The Drying Cabinet
Description of the drying cabinet Exhaust collar Drying cabinet model Hanger hooks Identification plate (inside) Upper hanger section Middle hanger section Lower hanger section Shoe rack Air intake 10. Control panel 11. Door 12. Door hanger for lighter items 12. Glove hanger... -
Page 7: Where To Install It
Where to install it If the drying cabinet is to be installed with a connection to exhaust air ventilation, this must be available on the premises. See futher section “Ventilation alterna- tives”, page 9. A grounded electrical outlet must be ... -
Page 8: Electrical Requirements
Electrical requirements User’s responsibility It is the responsibility of the user to contact a qualified electrician if the electric outlet socket is not easily accessible as laid down in this manual Electrical connection The drying cabinet must be connected to ... -
Page 9: Ventilation Alternatives
Ventilation alternatives Moist air can be discharged in two ways: Ventilation out into the room where the drying cabinet is located Connection to a vent duct (exhaust air ventilation) Ventilation out into the room where the drying cabinet is located Do not hesitate to open doors or windows ... -
Page 10: Connection To A Vent Duct
Connection to a vent duct When the cabinet is on, 45 m³ of humid air are evacuated per hour. So make sure that air can penetrate into the room to replace the humid air given off by the drying cabinet. The drying cabinet can be connected to a vent duct in two ways: With a draft stabilizer The ventilation duct valve is replaced by a... - Page 11 Permanently installed and connected to a vent duct (only certain markets) When the drying cabinet is permanently con- nected to the vent duct, the entire room is ventilated through the drying cabinet. The ventilation duct valve is replaced by an adapter (not included).
-
Page 12: Installation
Installation Unpacking WARNING The cabinet can easily tip over since it is not yet solidly screwed into place. Take off all the packing material; do not use a sharp tool which could damage the product. Check that the drying cabinet has not been damaged during transportation. -
Page 13: Placing The Door The Other Way Round
Placing the door the other way round The door can be hung on its hinges on the left or the right. 1. Lay the drying cabinet on its back side. 2. Disengage the hinge pin of the bottom hinge (1) and lift the door off. 3. -
Page 14: Horizontal Adjustment
Horizontal adjustment 1. Lift out the shoe rack. 2. Control that surfaces are horizontal by placing a bubble level parallel to the walls and parallel to the back and the door. 3. Use the Allen wrench provided, and cor- rect the position of all four adjustable feet through the holes in the base plate of the drying cabinet (use pliers if necessary). -
Page 15: Mounting Into Custom Cabinetry
Mounting into custom cabinetry Place the drying cabinet so that its front fits well into the cabinet mounting unit. Minimum air gap 10 mm between drying cabinet and mounting unit (abo- ve and behind the drying cabinet) Tape measure Assembly holes Drying cabinet back wall Wall behind the drying cabinet Keep the adhesive tape on the door until the... - Page 16 Fix the two parts of the wooden strip in place using two screws, each of them screwed into the wall behind the drying cabinet, so that they correspond with the holes marked as in point 4. Use screws of a suitable length. Push back the drying cabinet into its final location.
-
Page 17: Ventilation Connection
Ventilation connection If the drying cabinet is installed in a custom cabinetry, fit the exhaust collar through the vent opening in the upper part of the cabinetry when the drying cabinet is moved to its final location. 1. Place the exhaust collar over the hole in the drying cabinet’s top plate, align the screw holes and screw the exhaust collar into place. -
Page 18: Final Check
Final check 1. Check that all parts are mounted. If not - go through all the steps once more. 2. Check that no packing material is left lying around. 3. Use a mild washing up product with warm water and wash the drying cabinet inside and out. -
Page 19: How To Use The Drying Cabinet
How to use the drying cabinet Starting 1. Place the articles to be dried in the drying cabinet and shut the door. See also the section ”Loading”. 2. Set an appropriate temperature and drying time. See the section ’Setting the tempe- rature selector knob’. -
Page 20: Some Advice For Users
Do not overload the drying cabinet. The items will become creased and drying uneven. Instead, leave a certain distance between items of washing, if this is pos- sible If there is a risk that certain articles give off their colour, free space should be left around them. -
Page 21: Setting The Temperature Selector Knob
Setting the temperature selector knob ����������� � ������ ��� Setting Type of fabric Foam rubber products, plastic, clothes which are sensitive to heat Sportswear, underwear, shirts, blouses, silk garments, washable knitted products Sturdy working clothes, denim, cotton garments, training sweaters (cotton) �����... -
Page 22: Care
Care Cleaning the drying cabinet High-pressure cleaning should not be used! The walls of the cabinet should be clea- ned with a mild soap solution on a damp cloth. Dust frequently gathers round the air intake orifice on the upper part of the cabinet. -
Page 23: Trouble Shooting
Trouble Shooting Before calling on outside help, first try to put the trouble right with the help of the indications below. Trouble Cause Garments are not The fuses controlling the drying being dried as cabinet have tripped. expected The temperature and/or time se- ... -
Page 24: Service
Service Before you contact customer service, you should find out the designation of the model, its type and its serial number. The designation of the model is inscribed on the cabinet control panel. The type and the serial number are inscribed on the identifica- tion plate which is placed on the inside of the cabinet. -
Page 25: Technical Information
Technical information Technical characteristics Capacity: Water removal rate : Electricity connection: Motor: Heating element output: Overheating protection: Timer: Hanging length: Dimensions: Weight: Colour: Noise level: Evacuation/Air intake When the cabinet is on, 45 m³ of humid air are evacuated per hour. Energy consumption and drying time Spun-dried washing *) Setting... -
Page 26: Personal Notes
Personal notes... - Page 28 Art. Nr: 427000391 Rev. 01 We reserve the right to make alterations. Printed on environment friendly paper, complying with the requirements of Miljöförbundet (Swedish Environmental Organisation) and Natur- skyddsföreningens (Swedish Association for nature conservancy).
Need help?
Do you have a question about the MDE 1100AES and is the answer not in the manual?
Questions and answers