Deep Cleaner Basics; Filling The Tank - Maytag Agility User Manual

Deep Cleaner Basics

Fill the solution tank
Unplug deep cleaner from
electrical source.
Press button (A) and remove solution
tank (Fig. 3)
Release latches (B) on tank cap and
remove (Fig. 4)
Use cap (Fig. 5) to measure the proper
amount of detergent according
to the chart below:
Surface
Carpet
Upholstery
NOTE: For best results, use only MAYTAG detergents.
They are specifically formulated for use with your
AGILITY™ Deep Cleaner.
Pour detergent into tank
Fill tank to fill line (C) (approx. 4 litres) with hot tap water
(Fig. 6)
Replace cap. Secure both latches (B) (Fig. 4)
Place bottom of tank onto cleaner. Pivot top of tank and
snap in place (Fig. 7)
Caution:
Detergents contain Anionic and Nonionic
Surfactants. Avoid contact with the eyes and skin. In case
of contact with eyes, flush with cold water for 15 minutes.
In case of contact with skin, wash with water. If irritation
persists, refer to your GP.
Amount of
detergent Type of detergent
two Carpet/
caps Upholstery Detergent
one Carpet/
cap Upholstery Detergent
3
A
4
B
5
6
C
7
Continued
B
5