Draining & Storing Hose - Maytag Agility User Manual

20
21
C
22
23
E
D
24
F
8
A
B
The handle must be in the upright position in order to
get cleaning solution through the hose.
Drain the hose
When finished using the hose and tool, remove water
from the hose.
Turn deep cleaner on and hold end of hose up for
several seconds (A). Do not press trigger. (Fig. 20)
Turn deep cleaner off and unplug it.
Hold hose connector in sink and press trigger to
remove solution from hose (B) (Fig. 20).
Store hose
Unplug deep cleaner from electrical source.
Hook hose connector (C) into caddy (Fig. 21).
Wrap hose around caddy in a anticlockwise
direction (Fig. 22).
Hook tool connector (D) and 'SpinScrub' tool (E) onto
caddy (Fig. 23).
Snap upholstery tool (F) into caddy (Fig. 24).