Raritan Dominion LX Quick Setup Manual

Dominion LX
Quick Setup Guide
Thank you for your purchase of the Dominion
Video, Mouse) switch for your growing SMB business.
For details on using the LX, access online help from the application, or download help in PDF format from the
Raritan's website.
Package Contents
™
Each LX ships as a fully-configured, stand-alone product in a
standard 1U 19" rackmount chassis. Each LX device ships
with the following contents:

1 - LX device

1 - Rackmount kit

1 - AC power cord

1 - LX Quick Setup Guide

1 - Application note

1 - Warranty card
QS Rule
In Raritan products that require Rack Mounting, please follow
these precautions:

Operation temperature in a closed rack environment may
be greater than room temperature. Do not exceed the
rated maximum ambient temperature of the appliances.
See Specifications in online help.

Ensure sufficient airflow through the rack environment.

Mount equipment in the rack carefully to avoid uneven
mechanical loading.

Connect equipment to the supply circuit carefully to avoid
overloading circuits.

Ground all equipment properly, especially supply
connections, such as power strips (other than direct
connections), to the branch circuit.
QS Rule
Rack Mounting
The LX can be mounted in 1U (1.73", 44 mm) of vertical
space in a standard 19" equipment rack. You can mount the
LX facing the front of the rack or facing the rear of the rack.
To rack-mount the LX, use the brackets and screws that came
with the device.
Dominion LX Quick Setup Guide
QSG-LX-v2.6.0-0E-E  255-80-8010-00 RoHS
®
LX. The LX is the industry's highest quality, most affordable digital KVM (Keyboard,
Forward Mount
The steps in the table correspond to the numbers shown in
the front rackmount diagrams.
1. Secure the cable-support bar to the back end of the side
2. Slide the LX between the side brackets, with its rear panel
3. Secure the LX to the side brackets using the remaining
4. Mount the entire assembly in your rack and secure the
5. When connecting cables to the rear panel of the LX, drape
brackets using two of the included screws.
facing the cable-support bar, until its front panel is flush
with the "ears" of the side brackets.
included screws (three on each side).
side brackets' ears to the rack's front rails with your own
screws, bolts, cage nuts, and so on.
them over the cable-support bar.
Support page on
1