Radiant Cooktop - GE JBP79 Use And Care & Installation Manual

PROBLEM
NOT UNLOCK
AFTER CLEANCYCLE
ENTERING OVEN TIME
SURFACE mTS W~L NOT
NOT FAST ENOUGH
COOKTOP FEELS HOT
FOODS COOK SLOWLY
SURFACE UNITS DO NOT ] o Diff~culty may be in the main distribution panel ofyo~house, causdby a
WORK PROPE~Y
(may appear as cracks) OR
ABRASIONS ON RADIANT
COOKTOP GLASS SURFACE
POSSIBLE CAUSE
Heavily soiled ovens may need to self-clean again or for a longer period,
latch han&e was moved to the right but another progrm other than
self-clean was selected. Move latch handle to the right only when setting
self-clean cycle.
This is normal. Make sw flat-b~ttomed pms am used.
and the same diameter as the surface unit selec@d.
main circuit breaker, depending on the nature of the power supply. If a circuit
breaker is involved, reset it. If the control box uses fuses, the oven fuse
The cooktop surface unit controls are not proprly set, or the wrong control
Incorrect cleaning methods have been used, cookware with rough bottoms
and the surface of the cooktop. Use recommended cleaning procedures, be sure
cookware bottoms and cookware are cl~au before use, and-~se cookware with
smooth bottoms. Tiny scratches are not removable but will become less visible
in time as a result ofileaning.
Because the oven door is removable, it sometimes gets out of position during
installation. To straighmn the door, push down on the high corner.
(continued next page)
37