GE JBP79 Use And Care & Installation Manual page 28

OPERATING THE SELF-CLEANING OVEN
How to Set Delay Start of Cleaning
Quick Reminder:
1. Latch the door.
2. Press the AUTO SELF CLEAN pad.
3. Press the INCREASE or DECREASE pad
until desired Clean Time appears.
4. Press the STOP TIME pad.
5. Press the INCREASE or DECREASE pad
until the desired Stop Time appears in the display.
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
1. Follow steps to prepare the oven for cleaning.
2. Slide the latch handle to the
right as far as it will go.
Never force the latch
handle. Forcing the handle ~
will damage the door lock
mechanism.
3. Press the AUTO SELF CLEAN pad.
II
CLEAN
n
4. Press the INCREASE or DECREASE
pad to enter the Clean Time.
28
(continued)
5. Press the STOP TIME pad. "STOP
STOP
TIME
J
The earliest Stop Time will be the Clean Time
selected plus the time of day. For example:
If the Clean Time is 3 hours and the time of day is
be 9:00.
6. Press the INCREASE pad to change
+
The self-clean cycle will automatically begin after
"CLEAN" is displayed and the time for clean cycle
is set. The words "ON" and "LOCK" will appear
on the display. It will not be possible to open the
oven door until the temperature drops below the
lock temperature and the LOCK light goes off.
7. When the LOCK light is off, slide the latch handle
to the left as far as it will go and open the door.
TIME" and the earliest Stop Time you
can set v'ill appear in the display.
the Stop Time to a later time of day if
desired. For example: If you set Stop
Time at 11 :00. oven will start clean
cycle at 8:00 and end at 11 :00. The
door latches automatically.