Parrot CK3100 Series Installation Manual page 9

TRANSPORTER T5
2
Unclip the release button cover to
the left of the radio.
4
Feed the screen cable via the
cover towards the radio.
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Fitting the hands-free system 2 / 2
!
Make a notch using a file or a
knife.
Then glue the mounting (supplied)
onto the same button cover after
degreasing it (TAKE CARE
trap the cable).
3
5
not to