Parrot CK3100 Series Installation Manual page 11

TRANSPORTER T5
1 - replace the fusebox cover.
2 - reconnect the adapter and the aerials behind the radio, and slide them into the
housing.
3 - retest to check that the system is working correctly.
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Refit the system using the following procedure:
Reassembly