Parrot CK3100 Series Installation Manual page 5

TRANSPORTER T5
1
Using a guide, feed an electric
wire from the fusebox to the radio
housing.
3
Connect the +IGN using a male
round terminal to the blue wire
of the 84942 adapter in front of
the fuse holder or on the red
wire of the 86200 or
YY138CABL2 adapter.
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Finding an ACC wire
Then connect to the 5 amp fuse
(located in the middle of the lower
row) by means of a 2.5 mm
terminal.
2