Installation-Relay; Installation-Engine Detection; Installation-Fuel Monitoring - Oner OCT600-SG User Manual

Installation-Relay

Before installing, please identify acelrator line and cut it to 2 parts ( P1,P2)
Important Info:
The location and color of acelerator line each car are different, please try to find it according to the
video, (https://youtu.be/ITiAVMYlOM8 )，we suggest that you can hire some technicans to do it for you
1）Connect 2 green cables of relay to the cut parts (P1 & P2) of negative line from accelerator
2）Connect yellow cable of relay to Out 1 cable (yellow) of tracker;
3）Connect white cable of relay and I/O cable (red, positive) of tracker to power cable of car
battery ( positive, red)
4）Connect I/O cable of tracker ( black, GND) to power cable ( negative).
Installation-Engine Detecting
Get to kown engine status, if any one starts engine illegally, you can get alert.
1) Before installation, please identify power line of
engine( see video: https://youtu.be/ITiAVMYlOM8，
or ask technician for
2)Connect tracker I/O cable (I/O2,white) to power
line of engine.
Installation-Fuel Monitoringn (option)
Connect fuel sensor, get to know fuel consumption per day.
1) fuel sensor installtion
a. Pour oil from the tank and clear the residual oil
b. Select predrill point on the top of fuel tank;
c. Drill fixed point at the predrill point by tapper, and then start drilling; When it is done,select small drill
according to gasket of sensor and drill fixed holes to fix the fuel sensor;
d. Install fuel sensor to the fuel tank and fix it by screwer, fuel sensor installation complete.
2). Diagram
a. Connect black cable of fuel sensor to AD
cable (blue) of tracker.
b. Connect red cable of sensor to power cable
(red, positive) of car, connect blue cable of
sensor to power cable (negative,black) of car
ONER GPS Vehicle Tracker
User Manual
help)
.
Operation & Installation
IN2
6