Speed Limitation - Oner OCT600-SG User Manual

Vehicle Controls
Command
STP#******
(Stop car/Enable car moving）

Speed Limitation

Command
LSPx;MaxSpeed;NorSpeed#******
Other Functions
Command
SRT,hh:mm:ss,DD/MM/YYYY#****** To set device real time clock timing, device will adjust the
(RTC setting)
SWTn,h1:m1,h2:m2#******
(Working time setting)
Note: working time feature works according to
GPS time, default GPS time is GMT time ,in
order to make it work correctly
GPS time as local time
(check command timezone setting.page10)
AUP#******
(Firmware update OTA)
BAL;T;x#******
(SIM balance inquiry)
LBSx#******
(LBS Tracking)
ONER GPS Vehicle Tracker
User Manual
Description
SK#******
Command (no password):STP
I.E.： LSP1;120;80#000000.
Command(no password):LSPx;Maxspeed;Norspeed
Description
To set working time. authorized driving message will
,
please set
Command(no password): SWTn,h1:m1,h2:m2
To update device firmware by air, during updating
do not accept any operation, update duration is 3-4mins
when it is done, you will get a message
******=000000. I.E.: AUP#000000
Command( no password) AUP
******=000000 I.E.：STP#000000 SK#000000
Description
when car is moving over preset max speed, start speed
limitation, car will slow down and can not do acceleration,
when the speed is lower than norspeed you set, speed
limitation is over
******=000000. x=0 close(default),x=1,active
Maxspeed,Norspeed=30-200km/h
time according to the clock when there is no gps signal.
******=000000. hh:mm:ss=hour:minute:second, 24hour
format, DD/MM/YYYY=day/month/year
I.E.: SRT,14:08:30,27/08/2015#000000
Command(no password): SRT,hh:mm:ss,DD/MM/YYYY
be sent one time when car start at working time; illegal
driving alert will be sent each time the car starts at non
working time, support setting 3 working times
******=000000 .n=1-3,h1:m1=start time,h2:m2=end time
I.E. SWT1,08:09,10:30
To get balance of SIM card in the tracker
******=000000, T=SIM service center No.，China: 10086
x=code to get balance.China:101. I.E.: BAL;10086;101
Command(no password) BAL;T;x
Switch to LBS tracking, it still can track with GPS
******=000000 .x=0，close(default),x=1,active
I.E.: LBS1#000000
Command(no password): LBSx
Command List
SK
9