Installation-Relay; Installation-Engine Detecting; Installation-Car Door Detecting - Oner CT03 User Manual

Installation-Relay

Before installing, please identify acelrator line and cut it to 2 parts ( P1,P2)
Important Info:
The location and color of acelerator line each car are different, please try to find it according to the
video, (https://youtu.be/ITiAVMYlOM8 )，we suggest that you can hire some technicans to do it for you
1）Connect 2 green cables of relay to the cut parts (P1 & P2) of negative line from accelerator
2）Connect yellow cable of relay to output1 cable (yellow) of tracker;
3）Connect white cable of relay and I/O cable (red, positive) of tracker to power cable of car
battery ( positive, red)
4）Connect I/O cable of tracker ( black, GND) to power cable ( negative).

Installation-Engine Detecting

Get to kown engine status, if any one starts engine illegally, you can get alert.
1) Before installation, please identify power line of
engine( see video: https://youtu.be/ITiAVMYlOM8，
or ask technician for
2)Connect tracker I/O cable (input 4,white) to power
line of engine.

Installation-Car Door Detecting

Get to kown car door status, if any one open car door illegally, you can get alert.
1) Before installation, please identify power line
(negative) of car door signal light
2)Connect tracker I/O cable (input 2,white) to power
line of car door signal light.
ONER GPS Vehicle Tracker
User Manual
help)
Operation & Installation
6