Other Functions - Oner OCT600-SG User Manual

Other Functions

Command
指令
SPSx#******
(Power saving mode)
SOOxx00#******
(Engine status report)
Note: "SOOxx00#******","OO"beside "s" is
letter"O", "00"beside"xx"is number zero
SCNplat no.#******
(Plat No. setting)
Note: cancel plat No. setting, send command
SCN#000000
ZONEx#******
(Time zone setting)
RMx#*******
(Milage setting）
PSWxxxxxx#******
(Modify password)
VER#****** (Get firmware version)
IMEI#****** (Get IMEI）
REBOOT#****** (Reboot device）
ARM#*******
DISARM#****** (DISARM）
ONER GPS Vehicle Tracker
User Manual
(ARM）
Description
描述
Trackers do not get shake or any operation during
the preset time, enter ppwer saving mode. close
GPS,GPRS, you can recovery it by commands
******=000000. x=0，close(default),x=1-99mins
Command(no password)SPSx
To set engine status (on/off) report. ******=000000
1st x=send SMS or not when engine is on.
2nd x=send SMS or not when engine is off.
x=0, close(default), x=1, active
I.E： SOO1000#000000 Engine on, send SMS only
Command(no password): SOOxx00
After setting, all SMS come with plat No. and then
you can know which car has problem instantly.
******=000000. plat No.=number+letter,max 15digits
I.E.： SCNKT-45#000000
Command(no password):SCNplat no.
Default time zone: GMT. ******=000000.x=[1, 65535] to
set time difference in minute to GMT.For those ahead
of GMT, just input the time difference in minute directly.
'-'is required for those behind GMT
I.E.: zone -5 ZONE-300#000000
Command(no password): ZONEx
Modify milage of tracker
******=000000.x=0-999999KM
I.E.：RM100#000000,New milage is 100KM
Command(no password):RMx
******=000000, xxxxxx=new password，6digits
I.E.：PSW112233#000000,New password=112233
I.E. VER#000000. Command(no password):VER
I.E.: IMEI#000000 Command(no password):IMEI
I.E.: REBOOT#000000 Command(no password):REBOOT
In arm mode, engine on alert will be active
automatically,you can get SMS if engine is on
******=000000. I.E.: ARM#000000,DISARM#000000
Command(no password)
Command List
ARM DISARM
10