Enter Personal Information (Station Id); Set The Date And Time - Brother MFC-J220 Quick Setup Manual

8

Set the date and time

a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Date&Time.
Press OK.
d
Enter the last two digits of the year on the dial
pad, and then press OK.
e
Repeat for month/day/time in 24-hour format.
f
Press Stop/Exit.
9
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Station ID.
Press OK.
d
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a "+" for
international codes, press l.
e
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
f
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
10
Set Tone or Pulse dialling
mode
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Tone/Pulse.
Press OK.
d
Press a or b to choose Pulse (or Tone).
Press OK.
e
Press Stop/Exit.
11
Set the telephone line
type
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Phone Line Set.
Press OK.
d
Press a or b to choose Normal, PBX or ISDN.
Press OK.
e
Press Stop/Exit.
5