Brother MFC-250C Quick Setup Manual page 5

e
Turn the green knob on the protective yellow
cap clockwise until it clicks to release the
vacuum seal, then remove the cap a.
f
Take care to match the color of the lever
with the cartridge color b, as shown in the
diagram below.
g
Install each ink cartridge in the direction of the
arrow on the label.
1
a
1
2
h
Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
Important
After initial installation of the ink cartridges,
the machine will start cleaning the ink tube
system. This cleaning process will last
approximately four minutes.
DO NOT unplug the machine from the power
outlet or attempt to stop the cleaning process.
Interruption of cleaning process may cause
undesired print quality problems.
5