Table of Contents
Advertisement
T
In Windows 95, press Start, slide the cursor to Pro-
grams, and locate LapLink for Windows 95. High-
light the LapLink for Windows 95 line and press the
VersaGlide selection button or tap the pad once.
If you do not have a port enabled, LapLink prompts
you to enable one. (The IR port is enabled for wire-
less communications when the system ships.) Press
Yes
to do so and follow the on-screen instructions to
configure the port. Otherwise, press
2.
Once your ports are configured, select your communica-
tion method by pressing the appropriate button. The
buttons give you the following connection options.
T
Connect over cable
T
Connect over wireless
T
Connect over modem (if installed)
T
Connect over network
T
Connect over dial-up network
Once communication is established between systems, the
LapLink window is displayed.
Select the procedure you want to use by pressing one of
3.
the last three buttons in the LapLink toolbar at the top of
the screen.
T
Press the file transfer button to transfer files between
systems.
T
Press the Remote Control button to exercise control
over a remote system.
T
Press the Chat button to converse with another user
at the remote system.
When you finish, press the disconnect button to break
4.
the link between the local and remote systems. Press
.
No
OK
Introducing the Software 2-9
.
Advertisement
Table of Contents
