Table of Contents
Advertisement
Press
to reboot your system and wait for
7.
Ctrl-Alt-Del
Windows to reload.
Setup your serial mouse drivers as follows:
8.
T
In the Main program group, double click Windows
Setup. From the Options pull-down menu, select
Change System Settings.
T
Press the down arrow next to the mouse field. Locate
and highlight the following line:
Mouse Systems serial or bus mouse
T
Press OK.
T
Press Current (if available).
T
Press Restart Windows.
To use the serial mouse functions to regain use of the Ver-
saGlide, follow these steps. (If you restarted your system
with no mouse attached, go to the next section.)
From the Main group, double click Windows Setup.
1.
From the Options pull-down menu, select Change Sys-
tem Settings.
2.
Press the down arrow next to the mouse field. Locate
and highlight the following line:
Synaptics Touchpad
Press OK. Press Current (if available). Press Restart
3.
Windows.
Once Windows restarts, the VersaGlide is enabled and
the serial mouse is disabled.
Using Your NEC Versa 4-37
Advertisement
Table of Contents
