NEC Versa 2400 Series User Manual page 23

NOTE
Check that the AC outlet voltage falls in the
range of 100–240 Volts AC. Verify that the cord and
plug are appropriate for your AC source.
Connect the AC adapter as follows:
!
Use only the AC Adapter that comes with your NEC
Versa 2400 Series system. Although other AC
adapters may look similar, using them can damage
the system.
1. Connect the AC adapter cable to the power port on the
left side of your NEC Versa 2400 Series system.
2. Plug one end of the AC power cable into the AC adapter
and the other end into a 120- or 240-volt wall outlet.
CAUTION
Connecting the AC adapter
Getting Started 1-13