Grandstream Networks GXP1610 Administration Manual page 40

Send SIP Log
Maintenance ->Language
Display Language
Language File Postfix
Maintenance ->TR-069
ACS URL
TR-069 Username
TR-069 Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request
Username
Connection Request
Password
Connection Request
Port
CPE SSL Certificate
CPE SSL Private Key
Maintenance ->Security
Configuration via
Keypad Menu
Enable STAR key
Keypad locking
Password to lock/unlock

product model/version on boot up (INFO level);

NAT related info (INFO level);

sent or received SIP message (DEBUG level);

SIP message summary (INFO level);

inbound and outbound calls (INFO level);

registration status change (INFO level);

negotiated codec (INFO level);

Ethernet link up (INFO level);

SLIC chip exception (WARNING and ERROR levels);

Memory exception (ERROR level).
Configures whether the SIP log will be included in the syslog messages or
not. The default setting is "No".
Selects display language on the phone.
Specifies the language file postfix for downloaded language.
URL for TR-069 Auto Configuration Servers (ACS).
ACS username for TR-069.
ACS password for TR-069.
Enables periodic inform. If set to "Yes", device will send inform packets to
the ACS. The default setting is "No".
Sets up the periodic inform interval to send the inform packets to the ACS.
The user name for the ACS to connect to the phone.
The password for the ACS to connect to the phone.
The port for the ACS to connect to the phone.
The Cert File for the phone to connect to the ACS via SSL.
The Cert Key for the phone to connect to the ACS via SSL.
Configures the access control for the users to configure from keypad Menu.
There are three different options:

Unrestricted. All the options can be accessed in keypad Menu.

Basic settings only. The CONFIG option will not be available in LCD
Menu.

Constraint Mode. CONFIG, FACTORY FUNCTIONS and NETWORK
options will not be available in LCD menu.
If set to "Yes", the keypad can be locked by pressing and holding the STAR
* key for about 4 seconds. A lock icon will show indicating the keypad is
locked. The default setting is "Yes".
Note:
When the keypad is locked, users would need press and hold the STAR *
key for about 4 seconds and then enter the password to unlock it. If the Star
Key Lock is enabled without specifying password, user can press and hold
the STAR * key for 4 seconds and press OK to unlock the phone.
Configures the password to lock/unlock the keypad. The password field
allows number with up to 32 characters.
GXP1610/GXP1620/GXP1625/GXP1628/
GXP1630 Administration Guide
Page 39 of 52