Grandstream Networks GXP1610 Administration Manual page 39

Allow DHCP Option 120
to override SIP Server
3CX Auto Provision
Automatic Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Disable SIP NOTIFY
Authentication
Config Upgrade Via
Config Server Path
Config HTTP/HTTPS
User Name
Config HTTP/HTTPS
Password
Config File Prefix
Config File Postfix
XML Config File
Password
Authentication Config
File
Download Device
Configuration
Firmware Upgrade Via
Firmware Server Path
Firmware HTTP/HTTPS
User Name
Firmware HTTP/HTTPS
Password
Firmware File Prefix
Firmware File Postfix
Maintenance ->Syslog
Syslog Server
Syslog Level
Enables DHCP Option 120 from local server to override the SIP Server on
the phone. The default setting is "No".
Phone will multicast SUBSCRIBE for provision if this feature is enabled.
Enables automatic upgrade and provisioning. The default setting is "No".
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Device will not challenge NOTIFY with 401 when set to Yes.
Allows users to choose the provisioning method: TFTP, HTTP or HTTPS for
configuration file download.
Defines the server path for provisioning. It could be different from the
firmware server for upgrading.
The user name for the HTTP/HTTPS server (configuration file).
The password for the HTTP/HTTPS server (configuration file).
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching prefix will be downloaded.
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching postfix will be downloaded.
The password for encrypt/decrypt the XML configuration file using
OpenSSL.
Enabled/Disabled the option to authenticate the configuration file before
acceptance.
User can press the "Download" button to export the device's configuration
file. The configuration file is named as "config.txt".
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS for firmware file download.
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
The user name for the HTTP/HTTPS server (Firmware file).
The password for the HTTP/HTTPS server (Firmware file).
This field enables user to store different firmware files in one single directory
on the firmware server. If configured, only the firmware file with the matching
prefix will be downloaded.
This field enables user to store different firmware files in one single directory
on the firmware server. If configured, only the firmware file with the matching
postfix will be downloaded.
The URL or IP address of the syslog server for the phone to send syslog to.
Selects the level of logging for syslog. The default setting is "None". There
are 4 levels: DEBUG, INFO, WARNING and ERROR.
Syslog messages are sent based on the following events:
GXP1610/GXP1620/GXP1625/GXP1628/
GXP1630 Administration Guide
Page 38 of 52